Rubber Inflatable Heavy Lifting Ship Launching Airbags

Ship Airbag Inflatable Air bags For Shipping Underwater Air Lift Bags

Airbag Airbag introduction:

The process of ship airbag up-rowing refers to the technical method that ships use airbags to complete the up-rowing process. When the ship adopts this kind of technology, the rolling airbag should be used first, and then the lifting airbag cushion should be used after positioning. The basic principle of the upper row of ships is that the airbag is inflated at low pressure and carries a large area.

Inflatable Marine Rubber Airbag Technical Parameter

The new technology of airbag launching has its unique advantages. Practice has proved that with the application of high-strength lifting and moving airbags, the advent of new airbags, the successful design of berths and launching ramps, the launching of airbags for ships above 50,000 tons is complete Feasible, but relevant safety measures must be taken: the slipway and angled launching ramp for airbag launching of the ship should be carefully designed; airbag launching should be carried out according to the weight of the ship, the position of the center of gravity, the shape of the bottom line, the slope of the launching ramp, the water level, etc. Calculation: There should be a calculation basis for the internal pressure and internal stress of each airbag during each rolling stroke, especially when the ship produces stern fall and stern float.

Application areas:

Ship launching and launching:

Heavy goods handling:

Flotation and salvage:

Large airbag display:

Airbag application picture:

The development history of marine airbag:

According to related records, humans have been using the rolling wood principle to carry heavy objects more than 6,000 years ago. People still use the rolling wood principle to carry heavy objects in daily production and life. Marine airbag is a flexible heavy vehicle designed according to the principle of rolling wood.

In the 1980s, due to the manufacturing process and materials of airbags, the weight of airbag launching ships was between 100 tons and 500 tons.

In the early 1990s, people made innovations in the process and materials of airbag manufacturing: nylon cords replaced canvas as a new skeleton material, and a new type of integral winding manufacturing process was developed.

Some marine airbag manufacturers still use the old production technology of lap type. It is generally believed that the integrally produced marine airbag is more reasonable in structure and has a greater safety factor and bearing capacity.

Water-filled blasting test is an important method to check the performance of marine airbags.

The production and application of marine airbags are mainly implemented with reference to two industry standards: CB/T3795 "Airbags for the upper discharge and launching of ships", CB/T3837 "Process requirements for the upper discharge and launching of airbags for ships".

Qingdao Henger Shipping Supplies Co., Ltd

Lies in Qingdao, a beautiful coastal city with red tiling and green trees, blue sea and clear sky, Qingdao Henger Shipping Supplies Co., Ltd is a high-tech enterprise integrated with manufacturing, research and innovation, technical services, specialized in manufacturing marine products, such as marine rubber fender, marine airbag, navigation mark and marine buoy. All products get ISO 9001-2008 certificate and IACS quality authentication from CCS, BV, GL, ABS, LG, etc.

With strong technology base, advanced manufacturing technique, complete manufacturing facilities and well-equipped checkout equipment, Qingdao Henger Marine Supplies Co., Ltd is devoted to forge itself into a top-ranking international competitive marine products manufacturer providing high quality products and perfect service for all customers, and shoulder the responsibility of ensuring global marine safety via mutually beneficial cooperation with friends all over the world.

Service and transportation:

The product warranty period of Henger is 18 months, and the average supplier can not reach such a long time, which is also the trust we and customers have in our factory products.

After-sales service we are online 24 hours a day, as long as you have questions we will always be there, there will be professional staff to answer your questions and provide you with technical support.

Transportation We can take the deflation pallet transportation and the entire fender transportation without deflation according to the requirements of customers. We always put the customer's requirements first.

Thank you for reading. If you have any needs and interests, you can contact me.

Thanks for reading, if you have any interest or questions, please feel free to contact me.